page | 157
Basic Operation
Web Interface
Network > IP
1
4
5
6
7
2
3
1 Video and Control Networks
Click to switch between
combined and separate modes.
See Combined Mode (page
9) and Separate Mode (page
13) for more information.
2 MAC Address
Displays the MAC address of the
Matrix Controller.
3 Mode
Selects the network mode:
Static or DHCP.
4 IP Address
Enter the IP address of the
Matrix Controller. This field is
only available if the Mode is set
to Static.
5 Subnet
The subnet mask in this eld.
6 Gateway
The gateway address.
7 HTTP Port
Enter the HTTP listening port.
To Next Page
