page | 89
Adding Outputs
In order to add outputs, at least one input must be routed to an output within a group.
See Routing Inputs to Outputs (page 78) for more information.
1. From the route details screen, press the Add button on the front panel.
2. The add outputs screen will be displayed.
3. Use the ◄ or ► buttons on the front panel or on the IR remote control to scroll
through each of the available outputs.
Basic Operation
Menu System
viewsonic
(( back sel ))
LAN
POE
5V DC
1 2
Matrix Controller
Status
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
route details
in out add int
OR
LAN
POE
5V DC
1 2
Matrix Controller
Status
Menu
1 2 3
4 5 6
7 8 9
In 0 Out Set
Clear
Mask
Preset
Back
OK
Lock
viewsonic
(( back sel ))
To Next Page
Loading...
Need help?
General