Gefen EXT-CU-LAN - Get_Ip_Address

page | 178
Advanced Operation
Commands
#get_ip_address
Returns the IP address of the specied port on the Matrix Controller.
Syntax
#get_ip_address port
Parameters
port
Type: INTEGER
Accepts a number from the table below, specifying the desired port:
port Description
1
Control Port (LAN 1)
2
Video Port (LAN 2)
Example
#get_ip_address 2
IP ADDRESS 2 192.168.1.75
Related Commands
#get_gateway
#get_ip_mode
#get_ipcong
#get_netmask
#get_web_port
#set_gateway
#set_ip_address
#set_ip_mode
#set_netmask
#set_port_mode
#set_web_port
Advanced Operation