Gefen EXT-CU-LAN - Page 183

page | 171
Commands
Command Description
#set_udp_echo_access
Enables or disables the UDP echo status
#set_udp_echo_ip
Sets the address of the UDP echo server
#set_udp_echo_port
Sets the listening port of the UDP echo server
#set_udp_port
Sets the UDP listening port
#set_web_port
Sets the HTTP listening port
#use_telnet_login
Enables or disables Telnet login credentials
#use_telnet_welcome
Enables or disables the Telnet welcome message
p
Recalls the specied preset number
r
Routes an input to the specied output(s)
Advanced Operation