page | 15
8. Set the subnet mask to 255.255.255.0.
9. Open a Web browser and enter the following address: 192.168.1.74.
10. The login page to the Matrix Controller will be displayed.
10. Type admin (case-sensitive) in both the Username and Password elds, then click
the Login button.
Getting Started
Installation
Important
Do not use the IP address 192.168.1.74 because this is the IP address of the
Matrix Controller. If the current network conguration is already within this
range, make sure that the IP address 192.168.1.74 is not assigned to another
device in order to avoid conicts.
To Next Page
Loading...
