page | 31
Basic OperationBasic Operation
3. The Add User dialog will be displayed.
d. Type the name of the user in the Name eld.
e. Enter a description for the user in the Description eld.
f. Click on the Access Level drop-down list to select the user access level:
Operator, Group Administrator, Administrator, or Slave. See User Access
Level Summary (page 32) for detailed information on user access levels.
.
g. Create a password for the user. The password can be up to 10 characters in
length. The password will be masked when entered.
h. Click the Add button.
4. Repeat Steps 2 - 3 for each user that is created.
Although you may create any user ID you wish, it is not recommended to create
a user called “operator” or “administrator” as this can be confused with the access
level of the user.
Users
Important
If the user “front panel” is set to Operator access level, then the menu system
cannot be accessed through the front panel.