vi
Matrix Controller is a trademark of Gefen, LLC.
© 2015 Gefen, LLC. All Rights Reserved. All trademarks are the property of their respective owners.
Gefen, LLC reserves the right to make changes in the hardware, packaging, and any accompanying documentation
without prior written notice.
Pb
This product uses UL or CE listed power supplies.
Operating Notes
Cisco SG300 or SG500-series switches:
1. Login to the switch with a Web browser.
2. Go to Admin > Port Management > Port Settings.
3. Click Enable Jumbo Frames.
4. Click Apply to save the settings.
5. Click Multicast > Properties.
6. Enable Bridge Multicast Filtering.
7. Click Apply to save the settings.
8. Go to Multicast > IGMP Snooping.
9. Enable IGMP Snooping.
10. Click Apply to save the settings.
• The Gefen Syner-G Software Suite is a free downloadable application from Gefen
that provides network conguration assistance and automatic download and
installation rmware upgrades for this product. Always make sure that the Matrix
Controller is running the latest rmware.
To Next Page
Loading...
Need help?
General