○○○○○○○○○○○○○○○○○○○○○○
Disk & Hard Disk 3•21
SAVE GROUP STYLE PERFORMANCE (EX-
AMPLE)
1. Select GROUP STYLE PERFORMANCE from the
main Save page then press ENTER to gain access
to the FILE SELECTOR.
2. Select the destination device (Floppy or Hard
disk).
Press soft button F1 to select the Floppy disk.
Press soft button F2 to select the Hard disk.
3. Select the destination Block then press ENTER to
gain access.
If necessary, select an empty location to cre-
ate a new Block using the method already
discussed in the General Save procedure.
4. Select the Group file from the RAM directory and
its destination then press ENTER twice to execute
the command.
1
ENTER
TEM
To Next Page
Loading...
