○○○○○○○○○○○○○○○○○○○○○○
3•22 Reference Guide
SAVE ALL
Use «Save All» to save an entire set of file types
contained in RAM in a single step.
○○○○○○○○○○○○○○○○○○○○
©
Warning: Use “Save ALL” with care as this
procedure overwrites all data at the destination.
Be absolutely sure, therefore, of the file content in
○○○○○○○○○○○○○○○○○○○○
disk before using the “Save ALL” procedures.
The Save All procedure offers the following pos-
sibilities:
Save All Song: saves up to 16 Songs;
Save All Sound: saves an unspecified number
of Ram-Sounds and RAM -Sounds (16
Groups);
Save All Real Perf: saves 8 Groups of Real Per-
formances;
Save All Style Perf: saves 12 Groups of Rom
Style Performance banks, each containing up to
8 Style Performances;
Save All User Style: saves 4 Groups of User
Styles (including all associated User Style Per-
formances).
SAVE ALL SONG PROCEDURE (EXAMPLE).
1. Select ALL SONG from the main Save page then
press ENTER to gain access to the FILE SELEC-
TOR.
2. Select the destination device (Floppy or Hard
disk).
Press soft button F1 to select the Floppy disk.
Press soft button F2 to select the Hard disk.
3. Select the destination Block in the disk directory.
If necessary, select an empty location to cre-
ate a new Block using the method already
discussed in the General Save procedure.
4. Press ENTER twice to start the saving procedure.
3/4
ENTER
TEM
To Next Page
Loading...
Need help?
General
