○○○○○○○○○○○○○○○○○○○○○○
5•6 Reference Guide
Selection via MIDI
The Sound selection message must be received
on the MIDI channel assigned to the track to which
the Sound is assigned.
To select a SK760/880 Sound, you must send a
Control Change 00 (CC00/BankSelect MSB) and
Program Change (PC) message.
The relative numbers are also displayed in the main
page (Multi mode) and the selection window that
appears when you select a SOUND GROUPS
button.
The Sound table in the Appendix lists all the
SK760/880 Sounds and corresponding MIDI se-
lection messages.
To Next Page
Loading...
