GWN76XX User Manual
Version 1.0.19.25
Two modes are available:
PSK: Use a pre-shared key to authenticate to the Wi-Fi.
802.1X: Use a RADIUS server to authenticate to the Wi-Fi.
This field is available only when “Security Mode” is set to “WPA/WPA2” or
“WPA2”.
Two modes are available:
AES: This method changes dynamically the encryption keys
making them nearly impossible to circumvent.
AES/TKIP: use both Temporal Key Integrity Protocol and
Advanced Encryption Standard for encryption, this provides the
most reliable security.
This field is available only when “Security Mode” is set to “WPA/WPA2” or
“WPA2”.
Set the access key for the clients, and the input range should be: 8-63
ASCII characters or 8-64 hex characters.
This field is available only when “Security Mode” is set to “WPA/WPA2” or
“WPA2”.
The 802.11w standard is used to prevent certain types of WLAN DoS
attacks. 802.11w extends strong cryptographic protection and provides
data integrity and replay protection for broadcast/multicast Robust
management frames. Set this option to either to Disabled : disable
802.11w; Optional: both of the client supported and unsupported 802.11w
may have the network access authority; Required: only the client
supported 802.11w have the network access authority.
Configures RADIUS authentication server address.
This field is available only when “WPA Key Mode” is set to “802.1x”.
Configures RADIUS Server Listening port.
Default is: 1812.
This field is available only when “WPA Key Mode” is set to “802.1x”.
Enter the secret password for client authentication with RADIUS server.
This field is available only when “WPA Key Mode” is set to “802.1x”.
Check the box to enable settings a secondary RADIUS server.
Then you need to specify below three fields:
- RADIUS Server Address: Enter the secondary RADIUS server
address.
- RADIUS Server Port : Enter the secondary RADIUS server port.
The default port is 1812 and the range is 1-65535.