GWN76XX User Manual
Version 1.0.19.25
- RADIUS Server Secret: Enter the secret password for client
authentication with the secondary RADIUS server.
Configures the address for the RADIUS accounting server.
This field is available only when “WPA Key Mode” is set to “802.1x”.
RADIUS Accounting Server
Port
Configures RADIUS accounting server listening port.
Default is 1813.
This field is available only when “WPA Key Mode” is set to “802.1x”.
RADIUS Accounting Server
Secret
Enter the secret password for client authentication with RADIUS
accounting server.
This field is available only when “WPA Key Mode” is set to “802.1x”.
Secondary RADIUS
Accounting Server
Check the box to enable settings a secondary RADIUS accounting server.
Then you need to specify below three fields:
- RADIUS Accounting Server Address: Enter the secondary
Accounting RADIUS server address.
- RADIUS Accounting Server Port: Configures the secondary
RADIUS accounting server listening port. Default is 1813.
- RADIUS Accounting Server Secret: Enter the secret password
for client authentication with the secondary RADIUS accounting
server
Enter the RADIUS NAS ID.
This field is available only when “WPA Key Mode” is set to “802.1x”.
Click on the checkbox to enable the captive portal feature.
Choose Blacklist/Whitelist to specify MAC addresses to
be excluded/included from connecting to the zone’s Wi-Fi.
Default is Disabled.
Client isolation feature blocks any TCP/IP connection between connected
clients to GWN76XX’s Wi-Fi access point. Client isolation can be helpful
to increase security for Guest networks/Public Wi-Fi.
Three modes are available:
Radio Mode: Wireless clients can access to the internet
services,GWN7xxx router and the access points GWN76XX but
they cannot communicate with each other.
Internet Mode: Wireless clients will be allowed to access only the
internet services and they cannot access any of the management
services, either on the router nor the access points GWN76XX.
Gateway MAC Mode: Wireless client scan only communicate
with the gateway, the communication between clients is blocked
and they cannot access any of the management services on the
GWN76XX access points.