GRAPHTEC CE LITE-50 - Confirming Error Messages

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-89
6.2.36 Roll Media Stocker
How to disassemble the roll media stocker
(1) Remove the M4L16 coin screw holding the stocker bracket, and then detach the stocker bracket.
M4L16 coin screw
Stocker bracket
M4
hexagon nut
M4L16 at
head screws
M4L16 at
head screws
Stocker roller
Stocker roller
(2) Remove the two M4L16 at head screws holding the stocker rollers, and then detach the stocker
rollers.
How to reassemble the roll media stocker
(1) Reassemble the roll media stocker in the reverse order in which it was detached.