GRAPHTEC CE LITE-50 - Pinch Roller

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-77
6.2.33 Pinch Roller
How to detach the pinch roller
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the cross cut base (See subsection 6.1.4.).
(4) Detach the bottom cover (See subsection 6.1.5.).
(5) Detach the front guide (See subsection 6.1.6.).
(6) Detach the top cover (See subsection 6.1.3.).
(7) Detach the Y-exible cable cover (See subsection 6.2.1.).
(8) Detach the Y-exible cable guard (See subsection 6.2.2.).
(9) Detach the cam board L (See subsection 6.2.11.).
(10) Detach the encoder disk L (See subsection 6.2.13.).
(11) Detach the press cover L (See subsection 6.2.15.).
(12) Detach the X motor (See subsection 6.2.19.).
(13) Detach the X drive pulley (See subsection 6.2.18.).
(14) Detach the press unit L (See subsection 6.2.17.).
(15) Detach the cam board R (See subsection 6.2.10.).
(16) Detach the encoder disk R (See subsection 6.2.12.).
(17) Detach the press cover R (See subsection 6.2.14.).
(18) Detach the press unit R (See subsection 6.2.16.).
(19) Remove the cable from the LED board L.
(20) Remove the M3L6 binding head screw holding the left side of the X assy guard.
M3L6 binding head screw
(21) Detach the pinch roller bush L (See subsection 6.2.32.).
(22) Detach the pinch roller bush R (See subsection 6.2.31.).