GRAPHTEC CE LITE-50 - Press Unit R

6 DISASSEMBLY AND REASSEMBLY
CE LITE-UM-251-9370 6-30
6.2.16 Press Unit R
How to detach the press unit R
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the cam board R (See subsection 6.2.10.).
(3) Detach the encoder disk R (See subsection 6.2.12.).
(4) Detach the press cover R (See subsection 6.2.14.).
(5) Detach the cam lever.
Remove the cam lever
at 0 position (raised)
(6) Detach the camshaft.
(7) Detach the press unit R.
Press unit R
Cam shaft