GRAPHTEC CE LITE-50 - Press Cover R

6 DISASSEMBLY AND REASSEMBLY
CE LITE-UM-251-9370 6-28
6.2.14 Press Cover R
How to detach the press cover R
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the cam board R (See subsection 6.2.10.).
(3) Detach the encoder disk R (See subsection 6.2.12.).
(4) Remove the three M3L6 binding head screws holding the press cover R, and then detach the
press cover R.
M3L6 binding
head screws
How to reinstall the press cover R
(1) Reattach the press cover R in the reverse order in which it was detached.