GRAPHTEC CE LITE-50 - 7 Adjustment; Setting Values of the Main Board

CE LITE-UM-251-9370
7 ADJUSTMENT
7-1
7 ADJUSTMENT
7.1 Setting Values of the Main Board
You can check, read, and write the factory settings of the main board with the adjustment tool.
Save the setting values before replacing the main board and write the values on the new main board.
(1) Turn on the CE LITE-50.
(2) Set a paper to the device.
(3) Connect the PC and the CE LITE-50 via the USB cable.
(4) Double-click the adjustment tool ( CE LITE-50 ADJ. Tool ) to run.
(5) Click “Get current ADJ. value” on the tool.