GRAPHTEC CE LITE-50 - Supply Items

CE LITE-UM-251-9370
8 SERVICE MODE
8-3
8.2 Clear Setup Mode
This mode returns all the conditions to their default settings.
Operation
(1) Turn on the CE LITE-50.
(2) Set a paper to the device.
(3) Connect the PC and the CE LITE-50 via the USB cable.
(4) Double-click the adjustment tool ( CE LITE-50 ADJ. Tool ) to run.
(5) Click "Factory setting" on the tool.
(6) Click " OK" when "Factory setting OK?" Is displayed.