GRAPHTEC CE LITE-50 - Setting the Media Set Levers

6 DISASSEMBLY AND REASSEMBLY
CE LITE-UM-251-9370 6-8
6.1.5 Bottom Cover
How to detach the bottom cover
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the cross cut base (See subsection 6.1.4.).
(4) Remove the six M3L6 sems screws and the two M3L6 self-tapping screws holding the bottom
cover, and then detach the bottom cover.
M3L6 sems screws
M3L6 self-tapping screws
How to reinstall the bottom cover
(1) Reattach the bottom cover in the reverse order in which it was detached.