GRAPHTEC CE LITE-50 - Introduction and Safety Precautions; Notes on this Manual

CE LITE-UM-251-9370
ii
CONTENTS
1 INTRODUCTION ........................................................1-1
1.1 Main Specication ..........................................................1-1
1.2 External Dimensions ......................................................1-3
1.3 Supplies ...........................................................................1-3
2 PARTS NAMES and FUNCTIONS ..............................2-1
3 Operation Panel .......................................................3-1
3.1 Screens and Functions of Buttons .................................3-1
3.2 Menu Tree .......................................................................3-3
4 RECOMMENDED PARTS LIST ...................................4-1
5 LIST OF TOOLS ..........................................................5-1
5.1 Tools ................................................................................5-1
5.2 Greasing and Gluing Points ...........................................5-1
6 DISASSEMBLY AND REASSEMBLY ...........................6-1
6.1 Exterior Parts ..................................................................6-1
6.1.1 Right Side Cover ............................................................................6-1
6.1.2 Left Side Cover...............................................................................6-5
6.1.3 Top Cover .......................................................................................6-6
6.1.4 Cross Cut Base ...............................................................................6-7
6.1.5 Bottom Cover.................................................................................6-8
6.1.6 Front Guide ....................................................................................6-9
6.1.7 Rear Guide ...................................................................................6-11
6.2 Mechanical Parts ..........................................................6-12
6.2.1 Y-exible Cable Cover .................................................................6-12
6.2.2 Y-exible Cable Guard ................................................................6-13
6.2.3 Paper Sensor ................................................................................6-16
6.2.4 Support Rollers ............................................................................6-17