GRAPHTEC CE LITE-50 - Loading and Scanning Roll Media

6 DISASSEMBLY AND REASSEMBLY
CE LITE-UM-251-9370 6-38
6.2.18 X Drive Belt
How to detach the X drive belt
(1) Detach the left side cover (See subsection 6.1.2.).
(2) Detach the cam board L (See subsection 6.2.11.).
(3) Detach the encoder disk L (See subsection 6.2.13.).
(4) Detach the press cover L. (See subsection 6.2.15.).
(5) Loosen the three M4L6 binding head screws holding the X motor bracket.
M4L6 binding head screws
(6) Remove the M3L6 binding head screw holding the X drive pulley, and then detach the X drive
pulley.
(7) Remove the X drive belt from the X drive pulley.