CE LITE-UM-251-9370
8 SERVICE MODE
8-5
8.3 Self Test
Print a self-test pattern to check the operation of the plotter.
Operation
(1) Turn on the CE LITE-50.
(1) Set a paper larger than A3 size to the device.
(2) Install the pen tool to the carriage and set the conditions.
(3) Holding down the power button while the power is on.
(4) Select "SELF TEST" on the TEST screen.
(5) Press "Execute" button to start printing.
(6) Turn off the power to stop printing.
To Next Page
Loading...
