GRAPHTEC CE LITE-50 - Y Drive Belt

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-49
6.2.22 Y Drive Belt
How to detach the Y drive belt
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the top cover (See subsection 6.1.3.).
(4) Detach the Y-exible cable cover (See subsection 6.2.1.).
(5) Detach the Y-exible cable guard (See subsection 6.2.2.).
(6) Loosen the M3L6 TP head screw holding the Y drive belt tension arm.
M3L6 TP head screw
(7) Tighten the M3L6 TP head screw while pushing the Y drive belt tension arm in the direction of the
arrow to loosen the Y drive belt as shown in the gure.