GRAPHTEC CE LITE-50 - Cross Cut Base

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-7
6.1.4 Cross Cut Base
How to detach the cross cut base
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Remove the three M3L6 self-tapping screws holding the cross cut base, and then detach the cross
cut base.
M3L6 self-tapping screws
How to reinstall the cross cut base
(1) Reattach the cross cut base in the reverse order in which it was detached.