GRAPHTEC CE LITE-50 - Cutting Multiple Media (Copy Function)

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-53
6.2.23 Media Guide
How to detach the media guide
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the cam board R (See subsection 6.2.10.).
(4) Detach the encoder disk R (See subsection 6.2.12.).
(5) Detach the press cover R (See subsection 6.2.14.).
(6) Detach the press unit R (See subsection 6.2.16.).
(7) Detach the cam board L (See subsection 6.2.11.).
(8) Detach the encoder disk L (See subsection 6.2.13.).
(9) Detach the press cover L (See subsection 6.2.15.).
(10) Detach the X drive pulley (See subsection 6.2.18.).
(11) Detach the press unit L (See subsection 6.2.17.).
(12) Remove the four M2.6L10 self-tapping screws on the both sides of the frame, and then detach the
four spacers.
M2.6L10 self-tapping screws
(13) Detach the media guide.