GRAPHTEC CE LITE-50 - Home Position Detector Switch

6 DISASSEMBLY AND REASSEMBLY
CE LITE-UM-251-9370 6-22
6.2.9 Home Position Detector Switch
How to detach the home position detector switch
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the top cover (See subsection 6.1.3.).
(4) Detach the Y-exible cable cover (See subsection 6.2.1.).
(5) Detach the Y-exible cable guard (See subsection 6.2.2.).
(6) Remove the M2L10 self-tapping screw holding the home position detector switch, and then detach
the home position detector switch.
M2L10 self-tapping screw
Rear side of tool carriage