CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-23
How to reinstall the home position detector switch
(1) Reattach the home position detector switch to the tool carriage.
(2) Loosen the M3L6 TP head screw holding the Y drive belt tension arm.
Left side of frame
M3L6 TP head screw
(3) Tighten the M3L6 TP head screw while pushing the Y drive belt tension arm in the direction of the
arrow to loosen the Y drive belt as shown in the gure.
(4) Reattach the Y-exible cable guard to the frame.
(5) Loosen the M3L6 TP head screw holding the Y drive belt tension arm. Re-tighten the M3L6 TP
head screw after the Y belt tension is automatically adjusted by the Y belt tension spring.
(6) Reattach the other parts in the reverse order in which they were detached.
To Next Page
Loading...
