GRAPHTEC CE LITE-50 - Sending Cutting Data

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-17
6.2.4 Support Rollers
How to detach the support rollers
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the cross cut base (See subsection 6.1.4.).
(4) Detach the bottom cover (See subsection 6.1.5.).
(5) Remove the two M3L6 binding head screws holding the support roller bracket, and then detach the
bracket.
Bottom
M3L6 binding head screws
(6) Remove the two M3L8 at head screws holding the support rollers, and then detach the support
rollers.
M3L8
at head screws
Support roller bracket
Support rollers
How to reinstall the support roller
(1) Reattach the support rollers in the reverse order in which they were detached.