GRAPHTEC CE LITE-50 - Adjusting Cutting Quality and Offset Value

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-63
6.2.28 Main Board
How to detach the main board
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the cross cut base (See subsection 6.1.4.).
(4) Detach the bottom cover (See subsection 6.1.5.).
(5) Detach the front guide (See subsection 6.1.6.).
(6) Pull out the outside clamps from the frame.
(7) Release the cables from the three cable clamps.
Release the cables
Pull out the clamps
(8) Remove the two M3L6 binding head screws holding the main board bracket.
M3L6 binding head screws