GRAPHTEC CE LITE-50 - Y-Flexible Cable

6 DISASSEMBLY AND REASSEMBLY
CE LITE-UM-251-9370 6-68
6.2.29 Y-exible Cable
How to detach the Y-exible cable
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the top cover (See subsection 6.1.3.).
(4) Detach the carriage cover (See subsection 6.2.5.).
(5) Detach the Y-exible cable cover (See subsection 6.2.1.).
(6) Remove the Y-exible cable which is stuck on the Y-exible cable guard and the carriage assembly,
and then disconnect the Y-exible cable from the pen board.
(7) Detach the main board bracket.
(8) Detach the Y-exible cable which is stuck to the Y motor bracket, and then disconnect the Y-exible
cable from the main board.