GRAPHTEC CE LITE-50 - Cutting Thick Media and Tangential Mode

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-69
How to reinstall the Y-exible cable
(1) Reattach the Y-exible cable in the reverse order in which it was detached.
(2) Move the carriage to the left end. Fix the Y-exible cable with double-sided tapes at a position
where the left edge of the Y-exible cable is within the range as shown in the picture below.
Conrm that the left edge of
the cable is within this range.
300 mm from the right edge
Fix the Y-exible cable at the
positions as shown below.
(3) Reattach the other parts in the reverse order in which they were detached.