GRAPHTEC CE LITE-50 - Confirming Firmware Version

7 ADJUSTMENT
CE LITE-UM-251-9370 7-4
7.2 Selecting Language & Unit of Length
When you turn on the power of CE LITE-50 for the rst time or reset it to the factory default, the settings
for selecting the language and the unit of length are displayed.
These settings can be changed on the “ADVANCE” menu.
How to select the Language and Unit of Length
(1) The language selection screen appears after the startup screen.
Select the language and then touch “Conrm” button.
(2) Once the language has been set, the screen for selecting the unit of length will appear.
Select the length unit and then touch “Conrm” button.
Once the unit of length has been set, the HOME screen will appear.