GRAPHTEC CE LITE-50 - Y Motor

6 DISASSEMBLY AND REASSEMBLY
CE LITE-UM-251-9370 6-44
6.2.20 Y Motor
How to detach the Y motor
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Remove the two M3L6 binding head screws holding the Y motor shield, and then detach the Y
motor shield.
M3L6 binding head screws
Y Motor Shield
(3) Remove the two M3L6 binding head screws holding the Y motor, and then detach the Y motor.
M3L6 binding head screws
(4) Disconnect the cable from the Y motor.
How to reinstall the Y motor
(1) Reattach the Y motor in the reverse order in which it was detached.