CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-21
6.2.8 Registration Mark Sensor
How to detach the registration mark sensor
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the top cover (See subsection 6.1.3.).
(4) Detach the carriage cover (See subsection 6.2.5.).
(5) Detach the pen board (See subsection 6.2.6.).
(6) Detach the width detection board (See subsection 6.2.7.).
(7) Disconnect the cable from the registration mark sensor.
(8) Pull out the registration mark sensor slowly.
Registration mark sensor
How to reinstall the registration mark sensor
(1) Reattach the registration mark sensor in the reverse order in which it was detached.
To Next Page
Loading...
