GRAPHTEC CE LITE-50 - Registration Mark Types and Placement

6 DISASSEMBLY AND REASSEMBLY
CE LITE-UM-251-9370 6-24
6.2.10 Cam Board R
How to detach the cam board R
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Remove the M3L6 self-tapping screw holding the cam board R, and then detach the cam board R.
M3L6 self-tapping screw
(3) Disconnect the cable from the cam board R.
How to reinstall the cam board R
(1) Reattach the cam board R in the reverse order in which it was detached.