EasyManua.ls Logo

GRAPHTEC CE LITE-50 - 6 Disassembly and Reassembly; Exterior Parts; Right Side Cover

GRAPHTEC CE LITE-50
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-1
6 DISASSEMBLY AND REASSEMBLY
CAUTION
Be sure to spread a mat on the table when placing the surface other than the bottom of CE LITE-50 down.
The paint on the edge of the CE LITE-50 may be peeled off.
6.1 Exterior Parts
6.1.1 Right Side Cover
How to detach the right side cover
(1) Remove the three M3L6 binding head screws and the two M3L8 self-tapping screws holding the
right side cover.
M3L6 binding head screws
M3L8 self-tapping screw
M3L6 binding head screw
M3L8 self-tapping screw
(2) Slightly pull apart the right side cover, and then open the rear side.

Table of Contents

Other manuals for GRAPHTEC CE LITE-50

Related product manuals