GRAPHTEC CE LITE-50 - Encoder Disk R

6 DISASSEMBLY AND REASSEMBLY
CE LITE-UM-251-9370 6-26
6.2.12 Encoder Disk R
How to detach the encoder disk R
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the cam board R (See subsection 6.2.10.).
(3) Remove the M3L6 self-tapping screw holding the encoder disk R, and then detach the encoder
disk R.
M3L6 self-tapping screw
How to reinstall the encoder disk R
(1) Align the notch of the encoder disk with the rib of the camshaft.
(2) Tighten the M3L6 self-tapping screw to hold the encoder disk R.
(3) Reattach the other parts in the reverse order in which they were detached.