GRAPHTEC CE LITE-50 - Rear Guide

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-11
6.1.7 Rear Guide
How to detach the rear guide
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the cross cut base (See subsection 6.1.4.).
(4) Detach the bottom cover (See subsection 6.1.5.).
(5) Remove the three M3L6 binding head screws holding the rear guide, and then detach the rear
guide.
M3L6 binding head screws
How to reinstall the rear guide
(1) Reattach the rear guide in the reverse order in which it was detached.
Attach the rear guide aligning to the three guide bosses and conrm that the nine tabs are
engaged with the frame.
Rectangle hole on the frame Tab