GRAPHTEC CE LITE-50 - Cutting Printed Media with Software

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-29
6.2.15 Press Cover L
How to detach the press cover L
(1) Detach the left side cover (See subsection 6.1.2.).
(2) Detach the cam board L (See subsection 6.2.11.).
(3) Detach the encoder disk L (See subsection 6.2.13.).
(4) Remove the three M3L6 binding head screws holding the press cover L, and then detach the press
cover L.
M3L6 binding
head screws
How to reinstall the press cover L
(1) Reattach the press cover L in the reverse order in which it was detached.