GRAPHTEC CE LITE-50 - Pinch Roller Bush R

CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-75
6.2.31 Pinch Roller Bush R
How to detach the pinch roller bush R
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the cam board R (See subsection 6.2.10.).
(3) Detach the encoder disk R (See subsection 6.2.12.).
(4) Detach the press cover R (See subsection 6.2.14.).
(5) Detach the press unit R (See subsection 6.2.16.).
(6) Raise the cam lever.
(7) Detach the E-ring holding the pinch roller bush R, and then detach the pinch roller bush R.
How to reinstall the pinch roller bush R
(1) Reattach the pinch roller bush R in the reverse order in which it was detached.
Attach the right pinch roller bush with its notch facing down.