CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
6-67
How to reinstall the main board
(1) Attach the main board to the lower bracket.
(2) Connect the cables other than the X motor and Y motor cable to the main board.
(3) Attach the upper bracket and the power switch.
(4) Reattach the main board bracket to the frame carefully not to get the cables caught, and then
tighten the two M3L6 binding head screws.
(5) Connect the X motor and Y motor cables to the main board.
(6) Clamp the extra length of the cable.
(7) Reattach the other parts in the reverse order in which they were detached.
To Next Page
Loading...
