GRAPHTEC CE LITE-50 - Standard Accessories

3 OPERATION PANEL
CE LITE-UM-251-9370 3-2
Other Buttons
"Page" button ..........................Used to switch to the next page.
"Exit" button ............................Used to exit the current screen.
When touched before the button in the same screen is touched,
the screen changes to the previous screen without setting the
items.
"Conrm" button......................Used to conrm settings.
"Execute" button .....................Used to execute settings.
"Origin" button.........................Used to set the current position as an origin point.
"Cutting Area" button ..............Used to display th cutting area of the media that has been loaded.
"OK" button ............................. Used to conrm the position of the tool moved with the position
keys.
"Stop" button ...........................Stops the cutting operation.
This screen is used to
select setting items.
Press the button to set.
Menu Selection Screen
Light blue indicates the
selected setting.
Color of the Button
Press the white button to go
to the input screen.
Light blue boxes display the
current set value.
Input Buttons
Press the buttons to
input a number.
Inputting a number
Scroll the drum to
select a setting value.
Selecting from Drum
Select the item from
the list.
Selecting from List
Position Key
Move the tool carriage
or media by pressing
the key.