GRAPHTEC CE LITE-50 - Page 125

CE LITE-UM-251-9370
9 TROUBLESHOOTING
9-7
E04012
Exceeded detection area while
detecting the registration mark.
Check the media.
Make sure the print position of
the registration mark.
E04013
Exceeded detection area while
detecting the registration mark.
Check the media.
Make sure the print position of
the registration mark.
E04014
Exceeded detection area while
detecting the registration mark.
Check the media.
Make sure the print position of
the registration mark.
E04015
Exceeded detection area while
detecting the registration mark.
Check the media.
Make sure the print position of
the registration mark.
E04016
Exceeded detection area while
detecting the registration mark.
Check the media.
Make sure the print position of
the registration mark.
E04017
Exceeded detection area while
detecting the registration mark.
Check the media.
Make sure the print position of
the registration mark.
E04019
There was cancel operation by
the user.
Redo the process.
E04020
There is a defect in the detection
settings value.
Check the settings value.
E04021
Registration mark was not
detected in the auto detection
area.
Check the media.
Make sure the print position of
the registration mark.
E04022
There was cancel operation by
the user.
Redo the process.
E04023 Registration mark was not
detected.
Redo the sensor level
adjustment.
Change the color of the
registration mark.
Check the media.
Make sure the print position of
the registration mark.