CE LITE-UM-251-9370
9 TROUBLESHOOTING
9-10
E01012 The main board is defective. Replace the main board.
E01013 The main board is defective. Replace the main board.
E01014
The main board is defective.
or
The Motor is defective.
Replace the main board.
or
Replace the motor.
E01015
The main board is defective.
or
The Motor is defective.
or
The tool carriage is defective.
Replace the main board.
or
Replace the motor.
or
Replace the tool carriage.
E05001
Data lager than the buffer size
can not be copied.
Send a data normally without
using the copy mode.
E05002 There is no data to copy.
Perform normal cutting by
sending the data then use the
copy mode.
E05003
The available area on the media
to copy is too small.
Use a larger media.
Check the copy starting position.
To Next Page
Loading...
