CE LITE-UM-251-9370
11 TARGET COMPONENTS FOR WEEE INSTRUCTION
11-3
♦ How to remove the electrical component of the WEEE instruction
• Removing the main board
(1) Remove the three M3L6 binding head screws and the two M3L8 self-tapping screws holding the
right side cover.
M3L6 binding head screws
M3L8 self-tapping screw
M3L6 binding head screw
M3L8 self-tapping screw
(2) Slightly pull apart the right side cover, and then open the rear side.
To Next Page
Loading...
