1 INTRODUCTION
CE LITE-UM-251-9370 1-2
*1: Varies depending on the type of Graphtec-authorized lm and the cutting conditions.
*2: For non-standardized sizes, use the carrier sheet.
*3: The specically designed pen adapter (sold separately) is required. Three types of xing screws to
support different diameter of a pen are included.
Compatible pen diameters: 8.0 - 11.3 mm (there may be pens within this range that are not compatible)
*4: HP-GL
TM
is a registered trademark of the Hewlett-Packard Company in the United States.
*5: There may be cases that registration marks cannot be detected depending on the color or texture of the
media.
*6: Any OS for which support by the OS manufacturer has expired will not be applicable for support by
Graphtec either.
To Next Page
Loading...
