Issue 08/2013 Page 116
MAPLA- Modular energy supply system for load lifting magnets
Operation
Troubleshooting
6.10 Troubleshooting
This chapter describes the system fault displays and the required measures
for troubleshooting. Carefully read the safety instructions.
Safety instructions for troubleshooting
Danger
Risk of injury and risk of damage!
y
Opening or disassembling the iMAPLA system
puts the system at risk and compromises the
safety of the user.
► Do not open or dismantle the iMAPLA system!
► The iMAPLA system may only be opened by the
manufacturer or aparty authorised by it.
► Only carry out the work described in this manual.
Danger
Danger to life through electric shock
y
During operation, the power generation system generates
voltages that are potentially fatal.
► Work on the electrical installations and equipment must
only be carried out after the system has been switched o
and is de-energised.
► Switch o the drive unit before all inspection or
maintenance work on the generator or switch box. Prevent
the drive unit from being switched back on by accident
(e.g.remove the ignition key and keep somewheresafe).
Danger
Risk of injury and risk of damage! Danger to life!
► Never plug in or undo plug connections during operation.