GTS iMAPLA series - MMI Control Unit and Generator Details

Page 29 Issue 08/2013
iMAPLA system description
MMI control unit (stand-alone version)
4.6 MMI control unit (stand-alone version)
Note
The information in this chapter only applies for the stand-alone
version of the standard MMI.
Ö Options and accessories, page147
4.6.1 General
MMI control device
(MMI = Man-Machine-Interface)
The MMI control device intelligently controls all system functions and
indicates the operating states. The MMI sends the control information to the
iMAPLA system.
The MMI is installed inside the cab within the driver's eld of vision to allow
him/her to monitor the indicated operating states.
The MMI has acheck button for the insulation monitor as well as aswitch to
set the required operating mode.
Ö Set operating modes, normal mode and jog mode (machine handling
and sorting operation), page108