EasyManua.ls Logo

GTS iMAPLA series - References to Standards and Directives; Applicable Standards and Directives

GTS iMAPLA series
168 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 17 Issue 08/2013
References to standards and directives
3 References to standards and directives
The generator has been manufactured in accordance with the following
norms and directives.
y DIN EN 60034Part 1-9, rotating electrical machines
y DIN EN 60204-1; VDE 0113-1:2011-01
Safety of machinery - Electrical equipment of machines:
generalrequirements
y DIN VDE 0100 (VDE 0100) Regulations for the installation of electrical
power installations with rated voltages of up to 1,000V in particular:
- DIN VDE 0100-410; VDE 0100-410:2007-06
Low-voltage electrical installations-Part 4-41: protection for safety -
Protection against electric shock (IEC 60364-4-41:2005, amended)
- DIN VDE 0100-600; VDE 0100-600:2008-06 (previously IEC 60364-6:2006)
Low-voltage electrical installations- Part 6: tests (IEC 60364-6:2006,
amended) (e.g.Abschaltwerte on IT systems)
y DIN VDE 0701-0702; VDE 0701-0702:2008-06/BGV A3
Inspection after repairs, changes to electrical device repeat
checks-General requirements on electrical safety
y GUV2.10DEmpf BR:1981-11-25, UVV Accident prevention regulation
“Electrical systems and machinery materials” with implementation
instructions
y DIN EN 60529; VDE 0470-1:2,000-09
Protection types through housing (IP code) (IEC 60529:1989 + A1:1999)
and also DIN IEC 60529/A1; VDE 0470-1/A1:2010-04
“High-pressure water inspection” (IEC 70/118/CD:2009)
y DIN EN 61557-1; VDE 0413-1:2007-12
Electrical safety in low voltage distribution systems up to 1,000V a.c. and
1500V d.c. - Equipment for testing, measuring or monitoring of protective
measures- Part 1: general requirements
y DIN EN 61557-8; VDE 0413-8:2007-12
Electrical safety in low voltage distribution systems up to 1,000V a.c. and
1500V d.c. - Equipment for testing, measuring or monitoring of protective
measures- Part 8: insulation monitor equipment for IT systems
y DIN EN ISO 12100
Safety of machinery - General principles for design - Risk assessment and
risk reduction (ISO 12100:2010)

Table of Contents