Page 15 Issue 08/2013
Safety instructions
Important
y
The iMAPLA system is not suited for supplying xed
distribution systems.
y
The iMAPLA system is designed for aspecic output and
speed. The system can be damaged by voltage peaks and
overloads.
► The iMAPLA system must not be used for supplying
distribution units on building sites or other xed distribution
systems (e.g.domestic installations).
► Never connect the iMAPLA system to the public electricity
supply network. Never connect it with other power
generation systems.
► Never connect multiple controllers/systems together.
Important
The iMAPLA system must only be operated under the indicated
environmental conditions and cooling conditions.
Important
The iMAPLA system must only be used for supplying power
to suitable lifting magnets. Follow the lifting magnet's
manufacturer specications.
Important
Pay attention to the operating data.
Ö Technical data, page51.
Make sure the load cables connected to the magnet are suitable.
Ö Plug connections on the generator and switch box,
page37.
Important
When carrying out repairs, only use original parts from the
manufacturer, or third party parts which have been expressly
approved by the manufacturer.
To Next Page
Loading...